如何通过命令行为Linux安装驱动程序

一般来说,在安装操作系统之后,系统会推荐一定的驱动更新,如果有些不合适,那么你可以选择手动更新。例如有的wireless无线驱动工作不正常,sudo ifconfig也不存在wlan0,那么你就必须采取手动安装方法。

首先,先判断什么驱动工作不正常。是声卡,还是显卡,还是无线模块。

然后,在去官方网站下载驱动包,注意选择操作系统和应用平台(i386,X86,X86_64),

再根据安装包的不同采取操作。是需要编译的源代码,还是bin程序。

如果是源代码,一定要先阅读readme,执行

sudo make

sudo make install

sudo reboot

例如安装realtek的无线驱动

baidu@ww.baidu.org.tw:~/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011$ sudo make

[sudo] password for pp:

make -C /lib/modules/2.6.35-28-generic/build M=/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011 modules

make[1]: Entering directory `/usr/src/linux-headers-2.6.35-28-generic'

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/base.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rc.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/debug.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/regd.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/efuse.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/cam.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/ps.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/core.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/pci.o

LD [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtlwifi.o

Building modules, stage 2.

MODPOST 1 modules

CC      /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtlwifi.mod.o

LD [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtlwifi.ko

make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-28-generic'

make[1]: Entering directory `/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce'

make -C /lib/modules/2.6.35-28-generic/build M=/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce modules

make[2]: Entering directory `/usr/src/linux-headers-2.6.35-28-generic'

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce/hw.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce/table.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce/sw.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce/trx.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce/led.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce/fw.o

/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce/fw.c: In function ‘rtl92c_download_fw’:

/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce/fw.c:240: warning: format ‘%d’ expects type ‘int’, but argument 4 has type ‘long unsigned int’

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce/phy.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce/rf.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce/dm.o

LD [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce/rtl8192ce.o

Building modules, stage 2.

MODPOST 1 modules

CC      /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce/rtl8192ce.mod.o

LD [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce/rtl8192ce.ko

make[2]: Leaving directory `/usr/src/linux-headers-2.6.35-28-generic'

make[1]: Leaving directory `/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce'

make[1]: Entering directory `/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se'

make -C /lib/modules/2.6.35-28-generic/build M=/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se modules

make[2]: Entering directory `/usr/src/linux-headers-2.6.35-28-generic'

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se/hw.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se/table.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se/sw.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se/trx.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se/led.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se/fw.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se/phy.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se/rf.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se/dm.o

LD [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se/rtl8192se.o

Building modules, stage 2.

MODPOST 1 modules

CC      /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se/rtl8192se.mod.o

LD [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se/rtl8192se.ko

make[2]: Leaving directory `/usr/src/linux-headers-2.6.35-28-generic'

make[1]: Leaving directory `/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se'

make[1]: Entering directory `/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de'

make -C /lib/modules/2.6.35-28-generic/build M=/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de modules

make[2]: Entering directory `/usr/src/linux-headers-2.6.35-28-generic'

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de/hw.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de/table.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de/sw.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de/trx.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de/led.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de/fw.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de/phy.o

/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de/phy.c: In function ‘rtl92d_phy_reset_iqk_result’:

/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de/phy.c:3002: warning: format ‘%d’ expects type ‘int’, but argument 2 has type ‘long unsigned int’

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de/rf.o

CC [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de/dm.o

LD [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de/rtl8192de.o

Building modules, stage 2.

MODPOST 1 modules

CC      /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de/rtl8192de.mod.o

LD [M]  /home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de/rtl8192de.ko

make[2]: Leaving directory `/usr/src/linux-headers-2.6.35-28-generic'

make[1]: Leaving directory `/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de'

baidu@ww.baidu.org.tw:~/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011$ make install

make -C /lib/modules/2.6.35-28-generic/build M=/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011 modules

make[1]: Entering directory `/usr/src/linux-headers-2.6.35-28-generic'

rm: cannot remove `/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/.tmp_versions/rtlwifi.mod': Permission denied

make[1]: *** [crmodverdir] Error 1

make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-28-generic'

make: *** [all] Error 2

baidu@ww.baidu.org.tw:~/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011$ sudo make install

make -C /lib/modules/2.6.35-28-generic/build M=/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011 modules

make[1]: Entering directory `/usr/src/linux-headers-2.6.35-28-generic'

Building modules, stage 2.

MODPOST 1 modules

make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-28-generic'

make[1]: Entering directory `/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce'

make -C /lib/modules/2.6.35-28-generic/build M=/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce modules

make[2]: Entering directory `/usr/src/linux-headers-2.6.35-28-generic'

Building modules, stage 2.

MODPOST 1 modules

make[2]: Leaving directory `/usr/src/linux-headers-2.6.35-28-generic'

make[1]: Leaving directory `/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192ce'

make[1]: Entering directory `/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se'

make -C /lib/modules/2.6.35-28-generic/build M=/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se modules

make[2]: Entering directory `/usr/src/linux-headers-2.6.35-28-generic'

Building modules, stage 2.

MODPOST 1 modules

make[2]: Leaving directory `/usr/src/linux-headers-2.6.35-28-generic'

make[1]: Leaving directory `/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192se'

make[1]: Entering directory `/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de'

make -C /lib/modules/2.6.35-28-generic/build M=/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de modules

make[2]: Entering directory `/usr/src/linux-headers-2.6.35-28-generic'

Building modules, stage 2.

MODPOST 1 modules

make[2]: Leaving directory `/usr/src/linux-headers-2.6.35-28-generic'

make[1]: Leaving directory `/home/pp/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011/rtl8192de'

find /lib/modules/2.6.35-28-generic -name "r8192se_*.ko" -exec rm {} \;

find /lib/modules/2.6.35-28-generic -name "r8192ce_*.ko" -exec rm {} \;

baidu@ww.baidu.org.tw:~/Desktop/rtl_92ce_92se_92de_linux_mac80211_0003.0401.2011$

注意:有的linux操作系统默认没有安装gcc,如Fedora 14,需要先配置gcc

su root

yum -i gcc

如果是bin安装包,则如下操作:

例如:安装ati-driver

baidu@:~/Downloads$ sudo chmod +x ati-driver-installer-11-5-x86.x86_64.run

baidu@:~/Downloads$ sudo ./ati-driver-installer-11-5-x86.x86_64.run

在按照提示操作即可。

内容版权声明:除非注明,否则皆为本站原创文章。

转载注明出处:https://www.heiqu.com/23968.html