OpenGL中的FBO如何使用模板缓冲区

一般需求只有color buffer，depth buffer，前者一般用纹理，后者一般用rbo。标准程序如下：

// 创建
 // frame buffer object
 glGenFramebuffers(1, &fboId);
 glBindFramebuffer(GL_FRAMEBUFFER, fboId);

// color buffer with texture object
 glGenTextures(1, &color_rboId);
 glBindTexture(GL_TEXTURE_2D, color_rboId);
 glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, targetWidth, targetHeight, 0, GL_RGBA, GL_UNSIGNED_BYTE, 0);
 glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
 glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
 glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT);
 glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT);

// depth buffer with render buffer object
 glGenRenderbuffers(1, &depth_rboId);
 glBindRenderbuffer(GL_RENDERBUFFER, depth_rboId);
 glRenderbufferStorage(GL_RENDERBUFFER, GL_DEPTH_COMPONENT24, targetWidth, targetHeight);
 
 // Attach color buffer to FBO
 glFramebufferTexture2D(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, GL_TEXTURE_2D, color_rboId, 0);
 
 //Attach depth buffer to FBO
 glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_DEPTH_ATTACHMENT, GL_RENDERBUFFER, depth_rboId);
 
 
 //Also attach as a stencil
 glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_STENCIL_ATTACHMENT, GL_RENDERBUFFER, depth_stencil_rb);

// 删除
 if (fboId != 0)
 {
  glDeleteFramebuffers(1, &fboId);
  fboId = 0;
 }

if (depth_rboId != 0)
 {
  glDeleteRenderbuffers(1, &depth_rboId);
  depth_rboId = 0;
 }
 
 if (color_rboId)
 {
  glDeleteTextures(1, &color_rboId);
  color_rboId = 0;
 }

FBO中如何增加stencil buffer

正常人都会认为stencil buffer 跟depth buffer类似，于是乎写出一套类似depth buffer的框架：

// 创建stencil buffer以RBO形式
 glGenRenderbuffers(1, &stencil_rboId);
 glBindRenderbuffer(GL_RENDERBUFFER, stencil_rboId);
 glRenderbufferStorage(GL_RENDERBUFFER, GL_STENCIL_INDEX, targetWidth, targetHeight);
 
// 关联stencil buffer 和FBO
 glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_STENCIL_ATTACHMENT, GL_RENDERBUFFER, stencil_rboId);
 
// 删除stencil buffer
 glDeleteRenderbuffers(1, &stencil_rboId);

但实际测试，发现stencil buffer根本不起作用，下面是一个测试函数：

void stencilRenderTest()
{
 GLdouble dRadius = 0.1; // Initial radius of spiral
 GLdouble dAngle;        // Looping variable
 float x = 100;
 float y = 100;
 float rsize = 25;

// Clear blue window
 glClearColor(0.0f, 0.0f, 1.0f, 0.0f);

// Use 0 for clear stencil, enable stencil test
 glClearStencil(0.0f);
 glEnable(GL_STENCIL_TEST);

// Clear color and stencil buffer
 glClear(GL_COLOR_BUFFER_BIT | GL_STENCIL_BUFFER_BIT);

// All drawing commands fail the stencil test, and are not
 // drawn, but increment the value in the stencil buffer.
 glStencilFunc(GL_NEVER, 0x0, 0x0);
 glStencilOp(GL_INCR, GL_INCR, GL_INCR);

// Spiral pattern will create stencil pattern
 // Draw the spiral pattern with white lines. We
 // make the lines  white to demonstrate that the
 // stencil function prevents them from being drawn
 glColor3f(1.0f, 1.0f, 1.0f);
 glBegin(GL_LINE_STRIP);
 for(dAngle = 0; dAngle < 400.0; dAngle += 0.1)
 {
  glVertex2d(dRadius * cos(dAngle), dRadius * sin(dAngle));
  dRadius *= 1.002;
 }
 glEnd();

// Now, allow drawing, except where the stencil pattern is 0x1
 // and do not make any further changes to the stencil buffer
 glStencilFunc(GL_NOTEQUAL, 0x1, 0x1);
 glStencilOp(GL_KEEP, GL_KEEP, GL_KEEP);

// Now draw red bouncing square
 // (x and y) are modified by a timer function
 glColor3f(1.0f, 0.0f, 0.0f);
 glRectf(x, y, x + rsize, y - rsize);

}

stencil正确时，结果显示是一个蓝色背景，红色小矩形块，矩形内部可以看到圆弧，下图右。

stencil不正确结果是蓝色背景同心圆环 以及一个矩形红色块，图左。

 

相关阅读：

Ubuntu 13.04 安装 OpenGL

OpenGL三维球体数据生成与绘制【附源码】

Ubuntu下OpenGL编程基础解析

如何在Ubuntu使用eclipse for c++配置OpenGL