在11g 安装过程中默认只能指定一个 dg 用来存储:crs ,voting
但是Oracle 官方一般建议我们这么来配置:
1、当ocr没有配置镜像,或者冗余存储时 最少3个ocr 。
如果底层存储不是RAID的话,oracle建议镜像OCR,镜像可以避免单点故障。
■ At least two OCR locations if OCR is configured on an Oracle ASM disk group.
You should configure OCR in two independent disk groups. Typically this is the
work area and the recovery area.
2、如果ocr 配置在oracle asm disk group上时,建议最少两个ocr 位置
ocr 应当配置在两个单独的 disk group
■ At least two OCR locations if OCR is configured on mirrored hardware or
third-party mirrored volumes.
3、如果ocr 配置在有镜像的硬件或者在第3方的镜像卷上时也建议最少冗余2个ocr
在CentOS 6.4下安装Oracle 11gR2(x64)
eg:添加多个ocr (最多5个)
ocrconfig -add +asm_disk_group| file_name
ocrconfig -delete +ASM_disk_group| file_name
[root@vmrac1 ~]# ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 3
Total space (kbytes) : 262120
Used space (kbytes) : 3540
Available space (kbytes) : 258580
ID : 1902812549
Device/File Name : +CRS
Device/File integrity check succeeded
Device/File not configured
Device/File not configured
Device/File not configured
Device/File not configured
Cluster registry integrity check succeeded
Logical corruption check succeeded
[root@vmrac1 ~]# ocrconfig -add +ARCH --------------------------添加一个新的ocr +ARCH
[root@vmrac1 ~]# ocrcheck ------------------------------检查后已经成功添加
Status of Oracle Cluster Registry is as follows :
Version : 3
Total space (kbytes) : 262120
Used space (kbytes) : 3540
Available space (kbytes) : 258580
ID : 1902812549
Device/File Name : +CRS
Device/File integrity check succeeded
Device/File Name : +ARCH
Device/File integrity check succeeded
Device/File not configured
Device/File not configured
Device/File not configured
Cluster registry integrity check succeeded
Logical corruption check succeeded