2009.08 添加 dnw usb下载功能(2)

#include <common.h>
#include <command.h>
#include <asm/byteorder.h>

#ifdef CONFIG_USB_DEVICE

#ifdef CONFIG_USE_IRQ
    #define IRQ_STACK_START    (_armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4)
    #define FIQ_STACK_START    (IRQ_STACK_START - CONFIG_STACKSIZE_IRQ)
    #define FREE_RAM_END        (FIQ_STACK_START - CONFIG_STACKSIZE_FIQ - CONFIG_STACKSIZE)
    #define FREE_RAM_SIZE        (FREE_RAM_END - PHYS_SDRAM_1)
#else
    #define    FREE_RAM_END    (_armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4 - CONFIG_STACKSIZE)
    #define    FREE_RAM_SIZE    (FREE_RAM_END - PHYS_SDRAM_1)
#endif



int g_bUSBWait = 1;
u32 g_dwDownloadLen = 0;

extern int download_run;
extern volatile unsigned int dwUSBBufBase;
extern volatile unsigned int dwUSBBufSize;

extern __u32 usb_receive(char *buf, size_t len, unsigned int wait);

int do_usbslave (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
    int i;
    size_t len = ~0UL;
    char buf[32];

    /* download_run为1时表示将文件保存在USB Host发送工具dnw指定的位置
     * download_run为0时表示将文件保存在参数argv[2]指定的位置
     * 要下载程序到内存，然后直接运行时，要设置download_run=1，这也是这个参数名字的来由
     */
    download_run = 1;
    switch (argc) {
        case 1:
        {
            break;
        }
        case 2:
        {
            g_bUSBWait = (int)simple_strtoul(argv[1], NULL, 16);
            break;
        }

        case 3:
        {
            g_bUSBWait = (int)simple_strtoul(argv[1], NULL, 16);
            load_addr = simple_strtoul(argv[2], NULL, 16);
            download_run = 0;
            break;
        }
        
        default:
        {
            printf ("Usage:\n%s\n", cmdtp->usage);
            return 1;
        }
    }

    dwUSBBufBase = load_addr;
    dwUSBBufSize = (FREE_RAM_SIZE&(~(0x80000-1)));
    if (g_bUSBWait)
        len = FREE_RAM_SIZE;

    g_dwDownloadLen = usb_receive(dwUSBBufBase, len, g_bUSBWait);
    sprintf(buf, "%X", g_dwDownloadLen);
    setenv("filesize", buf);
    
    return 0;
}

U_BOOT_CMD(
    usbslave,    3,    0,    do_usbslave,
    "usbslave - get file from host(PC)\n",
    "[wait] [loadAddress]\n"
    "\"wait\" is 0 or 1, 0 means for return immediately, not waits for the finish of transferring\n"
);

#endif

修改common/Makefile