1.到Bochs官方下载源码包，因为用到了调试功能。 Bochs 最新版 下载地址
2.安装G＋＋编译器
如果不安装Ｇ＋＋编译器， 在执行configure时就会出现一些错误。
3.执行配置，开启调试和反汇编
./configure --enable-debugger --enable-disasm
4.ERROR: X windows gui was selected, but X windows libraries were not found.
出现这个错误时，请安装xorg-dev包
sudo apt - get install xorg - dev
5.Package gtk+-2.0 was not found in the pkg-config search path.Perhaps you should add the directory containing `gtk+-2.0.pc'to the PKG_CONFIG_PATH environment variableNo package 'gtk+-2.0' foundERROR: pkg-config was not found, or unable to access the gtk+-2.0 package.Install pkg-config and the gtk+ development package,or disable the gui debugger, or the wxWidgets display library (whichever is being used).
出现这个错误时，请运行：
sudo apt - get install libgtk2 . 0 - dev
6.重新执行配置（出错处理如上）
./ configure-- enable - debugger-- enable - disasm
然后运行make
make
再install
sudo make install
我试过不用sudo来直接执行，会出错的，出错提示不明确，应该是权限不够
make :***[install_bin] 错误1
7.完成，执行bochs，嘻嘻，来个
@linuxidc:~/Downloads/bochs-2.6> bochs
========================================================================
Bochs x86 Emulator 2.6
Built from SVN snapshot on September 2nd, 2012
Compiled on Nov 29 2012 at 18:01:48
========================================================================
00000000000i[ ] reading configuration from .bochsrc
00000000000p[ ] >>PANIC<< .bochsrc:190: unsupported CPU model option.
00000000000e[CTRL ] notify called, but no bxevent_callback function is registered
========================================================================
Bochs is exiting with the following message:
[ ] .bochsrc:190: unsupported CPU model option.
========================================================================
00000000000i[CPU0 ] CPU is in real mode (active)
00000000000i[CPU0 ] CS.mode = 16 bit
00000000000i[CPU0 ] SS.mode = 16 bit
00000000000i[CPU0 ] EFER = 0x00000000
00000000000i[CPU0 ] | EAX=00000000 EBX=00000000 ECX=00000000 EDX=00000000
00000000000i[CPU0 ] | ESP=00000000 EBP=00000000 ESI=00000000 EDI=00000000
00000000000i[CPU0 ] | IOPL=0 id vip vif ac vm rf nt of df if tf sf ZF af PF cf
00000000000i[CPU0 ] | SEG sltr(index|ti|rpl) base limit G D
00000000000i[CPU0 ] | CS:0000( 0000| 0| 0) 00000000 00000000 0 0
00000000000i[CPU0 ] | DS:0000( 0000| 0| 0) 00000000 00000000 0 0
00000000000i[CPU0 ] | SS:0000( 0000| 0| 0) 00000000 00000000 0 0
00000000000i[CPU0 ] | ES:0000( 0000| 0| 0) 00000000 00000000 0 0
00000000000i[CPU0 ] | FS:0000( 0000| 0| 0) 00000000 00000000 0 0
00000000000i[CPU0 ] | GS:0000( 0000| 0| 0) 00000000 00000000 0 0
00000000000i[CPU0 ] | EIP=00000000 (00000000)
00000000000i[CPU0 ] | CR0=0x00000000 CR2=0x00000000
00000000000i[CPU0 ] | CR3=0x00000000 CR4=0x00000000
bx_dbg_read_linear: physical memory read error (phy=0x0000000000000000, lin=0x00000000)
00000000000i[CTRL ] quit_sim called with exit code 1
@linuxidc:~/Downloads/bochs-2.6>