HP服务器官方管理工具hpacucli，通过该工具可以查看HP服务器的Raid状态是否正常（如果Raid卡出问题，会影响数据的读写速度），服务器硬盘是否正常（如果硬盘坏掉，严重的情况会丢失数据），服务器电源是否有故障等信息。
HP服务器官方管理工具hpasmcli，通过该工具可以很详细查看服务器CPU，内存，处理器，电源等的温度信息。
硬件状态信息获取：
1)安装hpacucli(下载地址：HP hpacucli工具)
------------------------------------------分割线------------------------------------------
可以到Linux公社1号FTP服务器下载
FTP地址：ftp://ftp1.linuxidc.com
用户名：ftp1.linuxidc.com
密码：
在 2017年LinuxIDC.com/5月/HP服务器Linux下hpacucli常用命令/
------------------------------------------分割线------------------------------------------
[root@localhost ~]# rpm -ivh hpacucli-9.40-12.0.x86_64.rpm
2）查看服务器RAID、硬盘是否正常。
[root@localhost ~]# hpacucli ctrl all show config
[root@localhost ~]# hpacucli ctrl all show config detail 可以详细地查看RAID和硬盘的信息
[root@localhost ~]# hpacucli ctrl all show config
Smart Array E200i in Slot 0 (Embedded) (sn: PR97MP2834 )
array A (SAS, Unused Space: 0 MB)
logicaldrive 1 (558.7 GB, RAID 5, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 300 GB, OK)
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 300 GB, OK)
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 300 GB, OK)
[root@localhost ~]# hpacucli ctrl all show config detail
Smart Array E200i in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0
Serial Number: PR97MP2834
Cache Serial Number: P75B20C9SRO5BQ
RAID 6 (ADG) Status: Disabled
Controller Status: OK
Hardware Revision: A
Firmware Version: 1.82
Rebuild Priority: Medium
Expand Priority: Medium
Surface Scan Delay: 15 secs
Surface Scan Mode: Idle
Post Prompt Timeout: 0 secs
Cache Board Present: True
Cache Status: Temporarily Disabled
Cache Status Details: Cache disabled; low batteries.
Cache Ratio: 50% Read / 50% Write
Drive Write Cache: Disabled
Total Cache Size: 128 MB
Total Cache Memory Available: 96 MB
No-Battery Write Cache: Disabled
Cache Backup Power Source: Batteries
Battery/Capacitor Count: 1
Battery/Capacitor Status: Failed (Replace Batteries)
SATA NCQ Supported: False
Array: A
Interface Type: SAS
Unused Space: 0 MB
Status: OK
Array Type: Data
Logical Drive: 1
Size: 558.7 GB
Fault Tolerance: 5
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 64 KB
Full Stripe Size: 128 KB
Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Completed
Unique Identifier: 600508B1001038333420202020200004
Disk Name: /dev/cciss/c0d0
Mount Points: /boot 200 MB, / 542.5 GB
OS Status: LOCKED
Logical Drive Label: A0100C5FPR97MP2834 2E7A
Drive Type: Data
physicaldrive 1I:1:2
Port: 1I
Box: 1
Bay: 2
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 300 GB
Rotational Speed: 10000
Firmware Revision: HPDE
Serial Number: 6SE24FXD0000B124L36W
Model: HP EG0300FAWHV
PHY Count: 2
PHY Transfer Rate: 3.0Gbps, Unknown
physicaldrive 1I:1:3
Port: 1I
Box: 1
Bay: 3
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 300 GB
Rotational Speed: 10000
Firmware Revision: HPDE
Serial Number: 6SE27HWB0000B124KXPQ
Model: HP EG0300FAWHV
PHY Count: 2
PHY Transfer Rate: 3.0Gbps, Unknown
physicaldrive 1I:1:4
Port: 1I
Box: 1
Bay: 4
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 300 GB
Rotational Speed: 10000
Firmware Revision: HPDD
Serial Number: 6SE0KNEM0000B1012K5S
Model: HP EG0300FAWHV
PHY Count: 2
PHY Transfer Rate: 3.0Gbps, Unknown
[root@localhost ~]#
硬件温度信息获取：
1)安装hpasmcli
[root@localhost ~]# rpm -ivh hp-health-9.40-1602.44.rhel6.x86_64.rpm