# gedit arch/arm/kernel/sys_arm.c
-----------------------------------------------------------
asmlinkage long sys_arm_fadvise64_64(int fd, int advice,
loff_t offset, loff_t len)
{
return sys_fadvise64_64(fd, offset, len, advice);
}
asmlinkage int sys_kmd(unsigned int p_addr)
{
printk("p_addr = 0x%x\n", p_addr);
return p_addr;
}
# gedit include/asm-arm/unistd.h
-----------------------------------------------------------
#define __NR_fallocate (__NR_SYSCALL_BASE+352)
#define __NR_kmd (__NR_SYSCALL_BASE+353)
# gedit arch/arm/kernel/calls.S
-----------------------------------------------------------
CALL(sys_fallocate)
CALL(sys_kmd)
测试提供调用
-----------------------------------------------------------
#define _GNU_SOURCE /* or _BSD_SOURCE or _SVID_SOURCE */
#include <unistd.h>
#include <sys/syscall.h> /* For SYS_xxx definitions */
#define __NR_kmd (__NR_SYSCALL_BASE+353)
int kmd (unsigned int p_addr)
{
syscall (__NR_kmd, p_addr);
return 0;
}
int main ()
{
kmd (0x100000);
}
# arm-linux-gcc kmd.c -static
# cp a.out /tftpboot/
# tftp -g -r a.out 192.168.1.160
# ./a.out
p_addr = 0x100000
#if 1
#define DISP_LINE_LEN (16)
#define MAX_LINE_LENGTH_BYTES (64)
#define DEFAULT_LINE_LENGTH_BYTES (16)
#define int8_t char
#define int16_t short
#define int32_t long
#define int64_t long long
#define uint8_t u_char
#define uint16_t u_short
#define uint32_t u_long
#define uint64_t unsigned long long
#define t_scalar_t int
#define t_uscalar_t unsigned int
#define uintptr_t unsigned long
/*
* Print data buffer in hex and ascii form to the terminal.
*
* data reads are buffered so that each memory address is only read once.
* Useful when displaying the contents of volatile registers.
*
* parameters:
* addr: Starting address to display at start of line
* data: pointer to data buffer
* width: data value width. May be 1, 2, or 4.
* count: number of values to display
* linelen: Number of values to print per line; specify 0 for default length
*/
int print_buffer (ulong addr, void *data, uint width, uint count, uint linelen)
{
uint8_t linebuf[MAX_LINE_LENGTH_BYTES];
uint32_t *uip = (void *) linebuf;
uint16_t *usp = (void *) linebuf;
uint8_t *ucp = (void *) linebuf;
int i;
if (linelen * width > MAX_LINE_LENGTH_BYTES)
linelen = MAX_LINE_LENGTH_BYTES / width;
if (linelen < 1)
linelen = DEFAULT_LINE_LENGTH_BYTES / width;
while (count)
{
printk ("%08lx:", addr);
/* check for overflow condition */
if (count < linelen)
linelen = count;
/* Copy from memory into linebuf and print hex values */
for (i = 0; i < linelen; i++)
{
if (width == 4)
{
uip[i] = *(volatile uint32_t *) data;
printk (" %08x", (unsigned int)uip[i]);
}
else if (width == 2)
{
usp[i] = *(volatile uint16_t *) data;
printk (" %04x", usp[i]);
}
else
{
ucp[i] = *(volatile uint8_t *) data;
printk (" %02x", ucp[i]);
} data += width;
}