1.Oracle RAC服务端/etc/hosts部分内容如下
2.查看服务端的local_listener和remote_listener参数
3.客户端tnsnames.ora配置参考
3.1 10g的版本，监听配置方法如下
3.2 11g的版本，监听配置方法如下
3.3 业务分割，连接到实例1的业务
3.4 业务分割，连接到实例2的业务
4.测试failover功能
1. Oracle RAC服务端/etc/hosts部分内容如下
#public ip
172.16.7.112 jyracdb1
172.16.7.114 jyracdb2
#virtual ip
172.16.7.113 jyracdb1-vip
172.16.7.115 jyracdb2-vip
#scan ip(11g RAC 新特性)
172.16.7.120 jyracdb-scan
2. 查看服务端的local_listener和remote_listener参数
2.1 节点1 Oracle用户登录sqlplus / as sysdba
SQL> show parameter listener
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
listener_networks string
local_listener string (ADDRESS=(PROTOCOL=TCP)(HOST=
172.16.7.113)(PORT=1521))
remote_listener string jyracdb-scan:1521
SQL>
2.2 节点2 Oracle用户登录sqlplus / as sysdba
SQL> show parameter listener
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
listener_networks string
local_listener string (ADDRESS=(PROTOCOL=TCP)(HOST=
172.16.7.115)(PORT=1521))
remote_listener string jyracdb-scan:1521
SQL>
3. 客户端tnsnames.ora配置参考
3.1 10g的版本，监听配置方法如下
需要指定每一个节点的vip
linuxidc =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.7.113)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.7.115)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = linuxidc)
(FAILOVER_MODE =
(TYPE = session)
(METHOD = basic)
(RETRIES = 180)
(DELAY = 5)
)
)
)
3.2 11g的版本，监听配置方法如下
11g引进scanIP的新特性，即只需要指定scanIP，不再需要指定vip，对于RAC增加节点不需要再重新配置所有客户端的tnsnames.ora。
当然不用scanIP，还用之前的vip也是可以的。
linuxidc_scan =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.7.120)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = linuxidc)
(FAILOVER_MODE =
(TYPE = session)
(METHOD = basic)
(RETRIES = 180)
(DELAY = 5)
)
)
)
3.3 业务分割，连接到实例1的业务
当实例1正常时，固定连接到实例1：
linuxidc1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.7.113)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = linuxidc)
)
)
3.4 业务分割，连接到实例2的业务
当实例2正常时，固定连接到实例2：
linuxidc2 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.7.115)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = linuxidc)
)
)
4. 测试failover功能