在SUSE 10.3下重新编译了一遍qtopia 2.2.0，基本上参照网上的资料。
主机为SUSE 10.3。感觉busybox和qtopia要用同样的gcc，关键是lib。
来不及细细整理，大致过程如下，最后还摘抄了点错误和解决方法。
zlib
./configure --shared
vi Makefile
CC=/usr/local/arm/3.4.1/bin/arm-linux-gcc
LDSHARED=/usr/local/arm/3.4.1/bin/arm-linux-gcc -shared -Wl,-soname,libz.so.1
CPP=/usr/local/arm/3.4.1/bin/arm-linux-gcc -E
AR=/usr/local/arm/3.4.1/bin/arm-linux-ar rc
RANLIB=/usr/local/arm/3.4.1/bin/arm-linux-ranlib
生成libz.so libz.so.1 libz.so.1.2.3
cp libz.so* ../dist/lib/
cp *.h ../dist/inlucde/
cd e2fsprogs-1.40.2
export PATH=$PATH:/usr/local/arm/3.4.1/bin
./configure --host=arm-linux CC=arm-linux-gcc --enable-elf-shlibs
修改/usr/local/arm/3.4.1/arm-linux/sys-include/linux
中fd.h
添加#include <linux/compiler.h>
make
生成lib/libuuid.so *
cp lib/libuuid.so* ../dist/lib/
cd jpeg-6b/
(export PATH=$PATH:/usr/local/arm/3.4.1/bin)
./configure --host=arm-linux-gcc CC=arm-linux-gcc
make
生成libjpeg.a
cp libjpeg.a ../dist/lib/
cd libpng-1.2.23/
(export PATH=$PATH:/usr/local/arm/3.4.1/bin)
cp scripts/makefile.linux ./Makefile
vi Makefile
AR_RC=arm-linux-ar rc
CC=arm-linux-gcc
RANLIB=arm-linux-ranlib
ZLIBLIB=/home/wangbin/work/qt/zlib-1.2.3
ZLIBINC=/home/wangbin/work/qt/zlib-1.2.3
make
cp libpng12.so ../dist/lib/libpng.so
cp libpng12.so* ../dist/lib/
cp *.h ../dist/inlucde/
cd tslib-1.3/
./autogen.h
./configure --host=arm-linux CC=arm-linux-gcc
cd plugins
sed 's/-rpath \$(PLUGIN_DIR)/-rpath \`cd \$(PLUGIN_DIR) \&\& pwd\`/' Makefile>Makefile.temp
(LDFLAGS :=$(LDFLAGS) -rpath `cd $(PLUGIN_DIR) && pwd`)
rm Makefile -f
mv Makefile.temp Makefile
cd ..
make
cp src/.libs/libts* ../dist/lib/
cp src/*.h ../dist/inlucde/
以下生成本机用的uic designer等工具
cd qt2
export QTDIR=$PWD
export TMAKEDIR=/home/wangbin/work/qt/qtopia-free-2.2.0/tmake
export TMAKEPATH=$TMAKEDIR/lib/linux-g++
export PATH=$PATH:$TMAKEDIR/bin
echo yes|./configure -static -no-xft -no-sm
begin
cd src/tools/
sed 's/remove( this->fromLast() )/this->remove( this->fromLast())/' qvaluestack.h>temp.h
rm -f qvaluestack.h
mv temp.h qvaluestack.h
cd ../../
over
make -C src/moc
make -C src
make -C tools/designer
make -C tools/qvfb
qvfbview.o qvfbview.cpp
qvfbview.cpp: In constructor ‘QVFbView::QVFbView(int, int, int, int, QVFbView::Rotation, bool, QWidget*, const char*, uint)’:
qvfbview.cpp:171: error: cast from ‘unsigned char*’ to ‘int’ loses precision
make: *** [qvfbview.o] 错误 1
if ( (unsigned char *)data ==(unsigned char *) -1 ){
make
cp tools/qvfb/qvfb bin
cd qtopia-free-2.2.0/
vi qtopia/mkspecs/qws/linux-arm-g++/qmake.conf
将此行
QMAKE_LIBS_QT = -lqte
修改为
QMAKE_LIBS_QT = -lqte -lpng -lts -lz -luuid -ljpeg
export QTDIR=/home/wangbin/work/qt/qtopia-free-2.2.0/qt2
export QPEDIR=/home/wangbin/work/qt/qtopia-free-2.2.0/qtopia
export LD_LIBRARY_PATH=$QTDIR/lib:$QPEDIR/lib:$LD_LIBRARY_PATH
export TMAKEDIR=/home/wangbin/work/qt/qtopia-free-2.2.0/tmake
export TMAKEPATH=$TMAKEDIR/lib/qws/linux-arm-g++
export PATH=$PATH:$TMAKEDIR/bin:/usr/local/arm/3.4.1/bin
export PATH=$PATH:$QTDIR/bin:$QPEDIR/bin
cp $QPEDIR/src/qt/qconfig-qpe.h $QTDIR/src/tools
cd $QPEDIR/src/libraries/qtopia
cp custom-linux-ipaq-g++.cpp custom-linux-arm-g++.cpp
cp custom-linux-ipaq-g++.h custom-linux-arm-g++.h
cd /home/wangbin/work/qt/qtopia-free-2.2.0/
export PATH=$PATH:/usr/local/arm/3.4.1/bin
./configure -qte "-embedded -xplatform linux-arm-g++ -qconfig qpe -no-qvfb -depths 16 -system-jpeg -system-libpng -system-zlib -tslib -gif -thread -no-xft -release -I/home/wangbin/work/qt/dist/include -L/home/wangbin/work/qt/dist/lib -lpng -lts -lz -luuid -ljpeg" -qpe "-xplatform linux-arm-g++ -edition pda -displaysize 240x320 -I/home/wangbin/work/qt/dist/include -L/home/wangbin/work/qt/dist/lib -prefix=/home/wangbin/work/qt/dist/qtopia"
vi qtopia-free-2.2.0/qtopia/src/libraries/qtopia/qdawg.cpp
:294:
// QDawgPrivate::~QDawgPrivate()
~QDawgPrivate()
yes
make
make install
qconfig.h
Qpainter要能够旋转的话，去掉QT_NO_TRANSFORMATIONS
所以实际要注释的宏是/qt/src/tools/ qconfig-qpe.h和/qt/src/tools/qfeart