oracle linux 下成功配置X manager 与VNC(图)

今天在Oracle linux下配置了一下X manager 和vnc,是第一次配置vnc,vnc配置要比X manager简单许多这里记录一下:

----  X manager 配置:

1.修改GDM的配置文件,/etc/X11/gdm/gdm.conf,将[xdmcp]中的enable选项设置为true

[xdmcp]

# Distributions: Ship with this off. It is never a safe thing to leave

# out on the net. Setting up /etc/hosts.allow and /etc/hosts.deny to only

# allow local access is another alternative but not the safest.

# Firewalling port 177 is the safest if you wish to have xdmcp on.

# Read the manual for more notes on the security of XDMCP.

Enable=true

用vi编辑gdm.conf 进入后键入/xdmcp查找字符串xdmcp "n"是搜索下一句,这样就能快速的定位到xdmcp项

2.修改/etc/X11/xdm/xdm-config文件,将DisplayManager.requestPort: 0注释掉

! SECURITY: do not listen for XDMCP or Chooser requests

! Comment out this line if you want to manage X terminals with xdm

!DisplayManager.requestPort: 0

3.修改/etc/X11/xdm/Xaccess文件 #* #any host can get a login window 去掉此行首位的#

# right hand sides can match.

#

* #any host can get a login window

#

# To hardwire a specific terminal to a specific host, you can

4. 如果有防火墙,请打开177的端口

ok!配置完后用X manager进入吧

内容版权声明:除非注明,否则皆为本站原创文章。

转载注明出处:https://www.heiqu.com/da759b348db2f80b5b13e509eac63d8c.html