linux客户端：
修改ifcfg-eth0的文件，将BOOTPROTO选项改为DHCP，自动获取。
[root@localhost ~]# vi /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
BOOTPROTO=dhcp
HWADDR=00:0C:29:D1:8D:D2
ONBOOT=dhcp
重新启动网络服务
[root@localhost ~]# service network restart
通过ifconfig命令可以看到已经获取到了IP地址
eth0 Link encap:Ethernet HWaddr 00:0C:29:D1:8D:D2 inet addr:192.168.1.101 Bcast:192.168.1.1 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fed1:8dd2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2093 errors:2 dropped:0 overruns:0 frame:0 TX packets:634 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:184237 (179.9 KiB) TX bytes:73399 (71.6 KiB) Interrupt:169 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1129 errors:0 dropped:0 overruns:0 frame:0 TX packets:1129 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2006336 (1.9 MiB) TX bytes:2006336 (1.9 MiB)
内容版权声明：除非注明，否则皆为本站原创文章。
转载注明出处：http://127.0.0.1/wyyssy.html
