newcs, server,卫星接收和linux系统已经组装完毕，下面开始建立我们自己的共享服务器了！
1）进入红帽系统，去共享软件作者的网站下载cccam和newcs，然后安装到红帽系统中，将文件的属性设置为可执行，然后配置好自己的config文件，具体可以参考附件里我自己的简单设置。
2) 接上读卡器（我用的是usb转串口），插上数码天空卡。
3）先启动newcs软件，系统信息如下：
[ 11:49:42 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 11:49:43 ] [ ATR ] T=0 1etu=8.68us Guardtime:12etu WWT:115200etu
[ 11:49:43 ] [ ATR ] Historical bytes: [C2] G @ [00] h [90] [00]
[ 11:49:43 ] [ Loader ] Init Viaccess card
[ 11:49:43 ] [ Phoenix ] Setting Parity to: ODD
[ 11:49:43 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 11:49:43 ] [ Phoenix ] Setting Baud to standard 9600
[ 11:49:44 ] [ Keyman ] Adding key 000000beb7b6ec type 0 on Provider 000000 for caid 0500 ID=0
[ 11:49:44 ] [ Keyman ] Adding key 000000beb7b6ec type 1 on Provider FFF840 for caid 0500 ID=0
[ 11:49:44 ] [ Keyman ] Adding key 000000beb7b6ec type 1 on Provider 031D00 for caid 0500 ID=1
[ 11:49:44 ] [ Keyman ] Adding key 000000beb7b6ec type 1 on Provider 031D10 for caid 0500 ID=2
[ 11:49:44 ] [ Keyman ] Adding key 000000beb7b6ec type 1 on Provider 031D20 for caid 0500 ID=3
[ 11:49:45 ] [ Loader ] Card 0500 on port /dev/ttyUSB0 ready
[ 11:49:45 ] [ Loader ] Starting Newcamd Server on port 15050
[ 11:49:45 ] [ NewCS ] Ready to GO!
[ 11:49:45 ] [ Newcamd ] Newcamd thread Server started on port 15050
3）启动cccam, 系统信息如下：
[SCRIPT] start: CCcam Server
[ 11:56:44 ] [ Newcamd:15050 ] User dummy logged in, client: CCcam
[root@localhost ~]# [ 12:04:22 ] [ Newcamd ] ECM -> dummy (OK) 0500 31D00 02C6
[ 12:04:22 ] [ Newcamd ] ECM -> dummy (OK) 0500 31D00 02C6
4) 配置dm500的cccam.cfg, 保存，片刻，跳出来了，哈哈，难以抑制的兴奋呀。