[Quidway-Ethernet0/2]quit ；退出系统视图
5、链路聚合配置
[DeviceA] link-aggregation group 1 mode manual ；创建手工聚合组1
[DeviceA] interface ethernet 1/0/1 ；将以太网端口Ethernet1/0/1加入聚合组1
[DeviceA-Ethernet1/0/1] port link-aggregation group 1
[DeviceA-Ethernet1/0/1] interface ethernet 1/0/2 ；将以太网端口Ethernet1/0/1加入聚合组1
[DeviceA-Ethernet1/0/2] port link-aggregation group 1
[DeviceA] link-aggregation group 1 service-type tunnel # 在手工聚合组的基础上创建Tunnel业务环回组。
[DeviceA] interface ethernet 1/0/1 # 将以太网端口Ethernet1/0/1加入业务环回组。
[DeviceA-Ethernet1/0/1] undo stp
[DeviceA-Ethernet1/0/1] port link-aggregation group 1
6、端口镜像
[Quidway]monitor-port <interface_type interface_num> ；指定镜像端口
[Quidway]port mirror <interface_type interface_num> ；指定被镜像端口
[Quidway]port mirror int_list observing-port int_type int_num ；指定镜像和被镜像
7、VLAN配置
[Quidway]vlan 3 ；创建VLAN
[Quidway-vlan3]port ethernet 0/1 to ethernet 0/4 ；在VLAN中增加端口
配置基于access的VLAN
[Quidway-Ethernet0/2]port access vlan 3 ；当前端口加入到VLAN
注意：缺省情况下，端口的链路类型为Access类型，所有Access端口均属于且只属于VLAN1
配置基于trunk的VLAN
[Quidway-Ethernet0/2]port link-type trunk ；设置当前端口为trunk
[Quidway-Ethernet0/2]port trunk permit vlan {ID|All} ；设trunk允许的VLAN
注意：所有端口缺省情况下都是允许VLAN1的报文通过的
[Quidway-Ethernet0/2]port trunk pvid vlan 3 ；设置trunk端口的PVID
配置基于Hybrid端口的VLAN
[Quidway-Ethernet0/2]port link-type hybrid ;配置端口的链路类型为Hybrid类型
[Quidway-Ethernet0/2]port hybrid vlan vlan-id-list { tagged | untagged } ;允许指定的VLAN通过当前Hybrid端口
注意：缺省情况下，所有Hybrid端口只允许VLAN1通过
[Quidway-Ethernet0/2]port hybrid pvid vlan vlan-id ;设置Hybrid端口的缺省VLAN
注意：缺省情况下，Hybrid端口的缺省VLAN为VLAN1
VLAN描述
[Quidway]description string ；指定VLAN描述字符
[Quidway]description ；删除VLAN描述字符