+++ USB
Autosuspend = enabled
Device whitelist = (not configured)
Device blacklist = (not configured)
Bluetooth blacklist = disabled
Phone blacklist = disabled
WWAN blacklist = enabled
Bus 002 Device 002 ID 8087:8000 control = auto, autosuspend_delay_ms = 0 -- Intel Corp. (hub)
Bus 002 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
Bus 001 Device 002 ID 8087:8008 control = auto, autosuspend_delay_ms = 0 -- Intel Corp. (hub)
Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
Bus 004 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 3.0 root hub (hub)
Bus 003 Device 003 ID 04f2:b40d control = auto, autosuspend_delay_ms = 2000 -- Chicony Electronics Co., Ltd (uvcvideo)
Bus 003 Device 004 ID 058f:6366 control = on, autosuspend_delay_ms = 2000 -- Alcor Micro Corp. Multi Flash Reader (usb-storage)
Bus 003 Device 002 ID 10c4:8105 control = on, autosuspend_delay_ms = 2000 -- Cygnal Integrated Products, Inc. (usbhid)
Bus 003 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
+++ Battery Status
/sys/class/power_supply/BAT0/manufacturer = Hewlett-Packard
/sys/class/power_supply/BAT0/model_name = Primary
/sys/class/power_supply/BAT0/cycle_count = (not supported)
/sys/class/power_supply/BAT0/charge_full_design = 2599 [mAh]
/sys/class/power_supply/BAT0/charge_full = 2599 [mAh]
/sys/class/power_supply/BAT0/charge_now = 2599 [mAh]
/sys/class/power_supply/BAT0/current_now = 0 [mA]
/sys/class/power_supply/BAT0/status = Full
Charge = 100.0 [%]
Capacity = 100.0 [%]
linuxidc@linuxidc:~$
然后如果找到
+++ System Status
TLP power save = enabled
power source = ac
TLP power save = enabled ＃说明已经成功开启
sudo tlp stat #显示所有信息和设置
sudo tlp stat -b #只显示电池信息 相当于 sudo tlp-stat --battery
sudo tlp stat -c #只显示配置信息 相当于 sudo tlp-stat --config
sudo tlp stat -r #显示无线设备的状态信息 相当于 sudo tlp-stat -rfkill
sudo tlp stat -t #只显示温度和风扇转速 相当于 sudo tlp-stat --temp
sudo tlp stat -T #显示debug信息 (/var/log/debug)