超详细!使用 LVS 实现负载均衡原理及安装配置详解---转 (6)

ifconfig lo:0 $vip broadcast $vip netmask 255.255.255.255 up

route add -host $vip lo:0

echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore

echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce

echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore

echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce

 

2节点rs 上分别执行脚本:

bash /usr/local/sbin/lvs_dr_rs.sh

 

keepalived节点配置(2节点):

 

主节点( MASTER )配置文件

vim /etc/keepalived/keepalived.conf

vrrp_instance VI_1 {

    state MASTER

    interface eth0

    virtual_router_id 51

    priority 100

    advert_int 1

    authentication {

        auth_type PASS

        auth_pass 1111

    }

    virtual_ipaddress {

        192.168.0.38

    }

}

 

virtual_server 192.168.0.38 80 {

    delay_loop 6

    lb_algo rr

    lb_kind DR

    persistence_timeout 0

    protocol TCP

 

    real_server 192.168.0.18 80 {

        weight 1

        TCP_CHECK {

            connect_timeout 10

            nb_get_retry 3

            delay_before_retry 3

            connect_port 80

        }

    }

 

内容版权声明:除非注明,否则皆为本站原创文章。

转载注明出处:https://www.heiqu.com/wppjsx.html